05 / Products
Harness & Components
IP67 harnesses, Can Bus cables and hubs, ground nodes, junction boxes.
In brief
The harness is the spinal cord of the machine: it carries power and signals where they are needed, through joints, booms and engine bays.
We build IP67 sealed harnesses, Can Bus cables and hubs, branch connectors and junction boxes, including harnesses with electronics built in and submersible versions.
- Sectors
- Earth-moving, Agricultural machines, Marine
- Product families
- 7 families
Product families
The 7 families of this line
IP67 sealed harnesses
Sets of cables and connectors protected against dust and temporary immersion, designed for machines working outdoors. They are made to the customer's drawing, with the lengths and outputs required.
3 applications
Can Bus harnesses and cables
Cables and harnesses designed to carry CAN bus signals, with the characteristics the network requires. They are completed with the connectors and branches needed.
3 applications
IP67 ground nodes and branch connectors
They collect several ground connections or branches into one protected point. They reduce loose connections and make the installation tidier and easier to check.
3 applications
IP67 junction boxes
Closed boxes holding branches and connections, protected against dust and water. They are used where several cables must meet at a safe point on the machine.
3 applications
IP67 Can Bus hubs
New low-cost IP67 Can Bus hub with 6 outputs and connections for 2 CAN lines. Versions with 8 and 10 outputs are also available, together with end-of-line connectors with an integrated 120 ohm resistor.
3 applications
Harnesses with embedded electronics
Harnesses that include a small electronic part inside the body, for example a filter, a fuse or an adaptation circuit. Extra boxes are avoided and the number of connections is reduced.
3 applications
Submersible harnesses
Harnesses built to work in contact with water, also where the environment is corrosive or salty. They are used where an ordinary harness would not be enough.
3 applications
Where it is used
Sectors that use it
Talk to us about harness & components.
Describe the machine and its working environment: we propose the right components with the connections and configurations you need.